I'm trying to install MPLABX on a github CI/CD pipeline. i get the message libusb-1.0.so, even though libusb-dev has been installed.
Here's the script:
Here's the output:Code:name: Revomax run-name: ${{ github.actor }} is building Revomax on: [push] jobs: tutorial: runs-on: ubuntu-latest steps: - uses: actions/checkout@v4 - uses: actions/setup-node@v4 with: node-version: '20' - run: npm install -g bats - run: bats -v tutorial2: runs-on: ubuntu-latest steps: - name: Checkout repo uses: actions/checkout@v2 with: submodules: 'recursive' - name: Install dependencies run: | sudo apt-get update && \ sudo apt-get install -y libc6 libx11-6 libxext6 libstdc++6 libexpat1 libusb-dev && \ sudo apt-get clean && \ sudo apt-get autoremove && \ sudo rm -rf /var/lib/apt/lists/* - name: Install XC8 run: | wget https://ww1.microchip.com/downloads/aemDocuments/documents/DEV/ProductDocuments/SoftwareTools/xc8-v2.36-full-install-linux-x64-installer.run && chmod +x xc8-v2.36-full-install-linux-x64-installer.run && \ sudo ./xc8-v2.36-full-install-linux-x64-installer.run --mode unattended --unattendedmodeui none --netservername localhost --prefix "/opt/microchip-mplabxc8-bin/" - name: Install MPLABX run: | wget -U "Mozilla" https://www.microchip.com/bin/download?f=aHR0cHM6Ly93dzEubWljcm9jaGlwLmNvbS9kb3dubG9hZHMvYWVtRG9jdW1lbnRzL2RvY3VtZW50cy9ERVYvUHJvZHVjdERvY3VtZW50cy9Tb2Z0d2FyZVRvb2xzL01QTEFCWC12Ni4xMC1saW51eC1pbnN0YWxsZXIudGFy -O MPLABX-v6.10-linux-installer.tar && tar -xf MPLABX-v6.10-linux-installer.tar && sudo ./MPLABX-v6.10-linux-installer.sh --nox11 -- --unattendedmodeui none --mode unattended --ipe 0 --collectInfo 0 --installdir /opt/mplabx - name: Output results run: | ls -l
Code:$ act [Revomax/tutorial ] 🚀 Start image=catthehacker/ubuntu:act-latest [Revomax/tutorial2] 🚀 Start image=catthehacker/ubuntu:act-latest [Revomax/tutorial ] 🐳 docker pull image=catthehacker/ubuntu:act-latest platform= username= forcePull=true [Revomax/tutorial2] 🐳 docker pull image=catthehacker/ubuntu:act-latest platform= username= forcePull=true [Revomax/tutorial ] 🐳 docker create image=catthehacker/ubuntu:act-latest platform= entrypoint=["tail" "-f" "/dev/null"] cmd=[] [Revomax/tutorial ] 🐳 docker run image=catthehacker/ubuntu:act-latest platform= entrypoint=["tail" "-f" "/dev/null"] cmd=[] [Revomax/tutorial ] ☁ git clone 'https://github.com/actions/setup-node' # ref=v4 [Revomax/tutorial2] 🐳 docker create image=catthehacker/ubuntu:act-latest platform= entrypoint=["tail" "-f" "/dev/null"] cmd=[] [Revomax/tutorial2] 🐳 docker run image=catthehacker/ubuntu:act-latest platform= entrypoint=["tail" "-f" "/dev/null"] cmd=[] [Revomax/tutorial2] ⭐ Run Main Checkout repo [Revomax/tutorial2] 🐳 docker cp src=/home/werk/git-werkmap/OptiClimateRevolution_FW/. dst=/home/werk/git-werkmap/OptiClimateRevolution_FW [Revomax/tutorial2] ✅ Success - Main Checkout repo [Revomax/tutorial2] ⭐ Run Main Install dependencies [Revomax/tutorial2] 🐳 docker exec cmd=[bash --noprofile --norc -e -o pipefail /var/run/act/workflow/1] user= workdir= Get:1 https://packages.microsoft.com/ubuntu/22.04/prod jammy InRelease [3632 B] Get:2 https://ppa.launchpadcontent.net/git-core/ppa/ubuntu jammy InRelease [23.8 kB] Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB] Get:4 http://archive.ubuntu.com/ubuntu jammy InRelease [270 kB] Get:6 https://packages.microsoft.com/ubuntu/22.04/prod jammy/main amd64 Packages [141 kB] Get:7 https://packages.microsoft.com/ubuntu/22.04/prod jammy/main all Packages [1035 B] Get:8 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [119 kB] Get:9 https://ppa.launchpadcontent.net/git-core/ppa/ubuntu jammy/main amd64 Packages [2969 B] Get:10 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB] Get:11 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [1082 kB] Get:5 https://packagecloud.io/github/git-lfs/ubuntu jammy InRelease [28.0 kB] Get:12 http://archive.ubuntu.com/ubuntu jammy/main amd64 Packages [1792 kB] Get:13 https://packagecloud.io/github/git-lfs/ubuntu jammy/main amd64 Packages [1842 B] [Revomax/tutorial ] 🏁 Job succeeded Get:14 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [1695 kB] Get:15 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [2135 kB] Get:16 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [44.7 kB] Get:17 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages [17.5 MB] Get:18 http://archive.ubuntu.com/ubuntu jammy/multiverse amd64 Packages [266 kB] Get:19 http://archive.ubuntu.com/ubuntu jammy/restricted amd64 Packages [164 kB] Get:20 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1375 kB] Get:21 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [2242 kB] Get:22 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [51.1 kB] Get:23 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [1975 kB] Get:24 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [33.3 kB] Get:25 http://archive.ubuntu.com/ubuntu jammy-backports/main amd64 Packages [80.9 kB] Fetched 31.2 MB in 10s (3009 kB/s) Reading package lists... Done Reading package lists... Done Building dependency tree... Done Reading state information... Done | libxext6 is already the newest version (2:1.3.4-1build1). | libxext6 set to manually installed. | libc6 is already the newest version (2.35-0ubuntu3.6). | libstdc++6 is already the newest version (12.3.0-1ubuntu1~22.04). | libx11-6 is already the newest version (2:1.7.5-1ubuntu0.3). | libx11-6 set to manually installed. | The following additional packages will be installed: | libexpat1-dev libusb-0.1-4 | The following NEW packages will be installed: | libusb-0.1-4 libusb-dev | The following packages will be upgraded: | libexpat1 libexpat1-dev | 2 upgraded, 2 newly installed, 0 to remove and 25 not upgraded. | Need to get 288 kB of archives. | After this operation, 299 kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1-dev amd64 2.4.7-1ubuntu0.3 [147 kB] Get:2 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 libexpat1 amd64 2.4.7-1ubuntu0.3 [91.0 kB] Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libusb-0.1-4 amd64 2:0.1.12-32build3 [17.7 kB] Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 libusb-dev amd64 2:0.1.12-32build3 [32.0 kB] Fetched 288 kB in 1s (441 kB/s) | debconf: delaying package configuration, since apt-utils is not installed (Reading database ... 26642 files and directories currently installed.) | Preparing to unpack .../libexpat1-dev_2.4.7-1ubuntu0.3_amd64.deb ... | Unpacking libexpat1-dev:amd64 (2.4.7-1ubuntu0.3) over (2.4.7-1ubuntu0.2) ... | Preparing to unpack .../libexpat1_2.4.7-1ubuntu0.3_amd64.deb ... | Unpacking libexpat1:amd64 (2.4.7-1ubuntu0.3) over (2.4.7-1ubuntu0.2) ... | Selecting previously unselected package libusb-0.1-4:amd64. | Preparing to unpack .../libusb-0.1-4_2%3a0.1.12-32build3_amd64.deb ... | Unpacking libusb-0.1-4:amd64 (2:0.1.12-32build3) ... | Selecting previously unselected package libusb-dev. | Preparing to unpack .../libusb-dev_2%3a0.1.12-32build3_amd64.deb ... | Unpacking libusb-dev (2:0.1.12-32build3) ... | Setting up libexpat1:amd64 (2.4.7-1ubuntu0.3) ... | Setting up libusb-0.1-4:amd64 (2:0.1.12-32build3) ... | Setting up libexpat1-dev:amd64 (2.4.7-1ubuntu0.3) ... | Setting up libusb-dev (2:0.1.12-32build3) ... | Processing triggers for libc-bin (2.35-0ubuntu3.6) ... Reading package lists... Done Building dependency tree... Done Reading state information... Done | 0 upgraded, 0 newly installed, 0 to remove and 25 not upgraded. [Revomax/tutorial2] ✅ Success - Main Install dependencies [Revomax/tutorial2] ⭐ Run Main Install XC8 [Revomax/tutorial2] 🐳 docker exec cmd=[bash --noprofile --norc -e -o pipefail /var/run/act/workflow/2] user= workdir= | --2024-04-18 10:53:19-- https://ww1.microchip.com/downloads/aemDocuments/documents/DEV/ProductDocuments/SoftwareTools/xc8-v2.36-full-install-linux-x64-installer.run | Resolving ww1.microchip.com (ww1.microchip.com)... 23.209.233.96 | Connecting to ww1.microchip.com (ww1.microchip.com)|23.209.233.96|:443... connected. | HTTP request sent, awaiting response... 200 OK | Length: 71543287 (68M) [application/x-sh] | Saving to: ‘xc8-v2.36-full-install-linux-x64-installer.run’ | xc8-v2.36-full-inst 100%[===================>] 68.23M 3.17MB/s in 21s | | 2024-04-18 10:53:40 (3.33 MB/s) - ‘xc8-v2.36-full-install-linux-x64-installer.run’ saved [71543287/71543287] | [Revomax/tutorial2] ✅ Success - Main Install XC8 [Revomax/tutorial2] ⭐ Run Main Install MPLABX [Revomax/tutorial2] 🐳 docker exec cmd=[bash --noprofile --norc -e -o pipefail /var/run/act/workflow/3] user= workdir= | --2024-04-18 10:54:05-- https://www.microchip.com/bin/download?f=aHR0cHM6Ly93dzEubWljcm9jaGlwLmNvbS9kb3dubG9hZHMvYWVtRG9jdW1lbnRzL2RvY3VtZW50cy9ERVYvUHJvZHVjdERvY3VtZW50cy9Tb2Z0d2FyZVRvb2xzL01QTEFCWC12Ni4xMC1saW51eC1pbnN0YWxsZXIudGFy | Resolving www.microchip.com (www.microchip.com)... 173.223.115.160, 2a02:26f0:c900:69c::b18, 2a02:26f0:c900:69e::b18 | Connecting to www.microchip.com (www.microchip.com)|173.223.115.160|:443... connected. | HTTP request sent, awaiting response... 302 Moved Temporarily | Location: https://ww1.microchip.com/downloads/aemDocuments/documents/DEV/ProductDocuments/SoftwareTools/MPLABX-v6.10-linux-installer.tar [following] | --2024-04-18 10:54:06-- https://ww1.microchip.com/downloads/aemDocuments/documents/DEV/ProductDocuments/SoftwareTools/MPLABX-v6.10-linux-installer.tar | Resolving ww1.microchip.com (ww1.microchip.com)... 23.209.233.96 | Connecting to ww1.microchip.com (ww1.microchip.com)|23.209.233.96|:443... connected. | HTTP request sent, awaiting response... 200 OK | Length: 999229440 (953M) [application/x-tar] | Saving to: ‘MPLABX-v6.10-linux-installer.tar’ | MPLABX-v6.10-linux- 100%[===================>] 952.94M 2.94MB/s in 4m 54s | | 2024-04-18 10:59:00 (3.24 MB/s) - ‘MPLABX-v6.10-linux-installer.tar’ saved [999229440/999229440] | | 64-bit Linux detected. | Check for 64-bit libraries | These 64-bit libraries were not found and are needed for MPLAB X to run: | libusb-1.0.so | | For more information visit http://microchip.wikidot.com/install:mplabx-lin64 | [Revomax/tutorial2] ❌ Failure - Main Install MPLABX [Revomax/tutorial2] exitcode '1': failure [Revomax/tutorial2] 🏁 Job failed Error: The runs.using key in action.yml must be one of: [composite docker node12 node16], got node20
Adv Reply
Bookmarks